Over the last couple of weeks I have completed the cutting station.
This measures 7 feet long x 4 feet wide x 38 inches high. (213cm x 122cm x 97cm)
Due to the Covid 19 lockdown I have had no access to new materials, so have built this out of relaimed timber and sheet goods that I had to hand, comprising 9mm ply and 18mm mealmine faced chipboard and an assortment of 3 inch x 1.5 inch (85mm x 35mm) CLS, in three, five and seven foot lengths, that I recovered some years ago during a shop refit.
Here are some photos of how it all came together.
 |
| The space as it was! |
 |
| With the Toughbuilt C650 saw horses level the table saw supports go in |
 |
| Building raised supports for the MFT with the 3" x 1.5" CLS timber |
 |
| The MFT top in situ with full length tool compartments lined with 9mm ply |
 |
| Building the out feed and router tables |
 ) |
| The finished cutting station with a removable panel for the router plate (to be fitted at a later date |
)
No comments:
Post a Comment